BoPin 110 All-Purpose Acetoxy Silicone_Applications

BoPin 110 All-Purpose Acetoxy Silicone_Benefits

BoPin 110 Joint d'étanchéité silicone acétoxy tout usage

BoPin 110 is a single-component, acetoxy-cure silicone sealant designed for general glazing and sealing applications. It cures rapidly at room temperature upon exposure to moisture, forming a durable, flexible rubber that maintains performance across a wide temperature range. Fast skin formation and strong adhesion to glass and ceramic surfaces make it a reliable choice for window installation, decorative glass bonding, and professional gap filling.

Principaux avantages

Fast cure — tack-free within 8 minutes, significantly faster than neutral-cure alternatives
Strong adhesion to glass, glazed ceramics, and anodised aluminium without primer
Excellent elongation (≥400%) providing good flexibility under movement
UV resistant — resists ageing, yellowing and degradation from solar exposure
Stable performance from -50°C to +170°C
Non-sag formula suitable for vertical and overhead joints

Adhérer à

Verre et surfaces vitrées
Anodised aluminium
Glazed ceramic tiles
Non-oily timber

Domaines d'application

Window and door frame installation and sealing
Decorative glass panel bonding and sealing
General-purpose gap filling by professional applicators
Aluminium window and door frames to wall joint sealing
Glass display cabinets and shopfront glazing

Paquet

300ml cartridge — 24 units per carton
Available colors upon request

Informations complémentaires

Matériau de base	Silicone acétoxy
Système de polymérisation	Acetoxy (acid cure)
Sag / Slump	≤3 mm
Temps de formation de la peau	≤8 min
Working Time	≤10 min
Cure Rate (depth)	1–2 mm/day
Dureté (Shore A)	20
Résistance à la traction	≥1.0 MPa
Allongement à la rupture	≥400%
Capacité de mouvement	±15%
Résistance à la température	-50°C to +170°C
Couleur	Noir, Marron, Clair, Personnalisé, Gris, Blanc
Durée de conservation	12 months (unopened, ≤25°C)
Standard	JC/T 485-2007

Préparation de la surface — Ensure all surfaces are clean, dry and free from dust, grease and old sealant residues.
Application — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool within the working time using a wet spatula.
durcissement — Allow to cure at room temperature. Avoid water contact for at least 24 hours. Full mechanical properties are reached after 7 days.
Cleanup — Remove uncured sealant with a solvent. Cured sealant must be cut away mechanically.

Limites

Not suitable for structural load-bearing applications
Not recommended for movement exceeding ±15%
Non recommandé pour une immersion continue dans l'eau
Do not use in fully enclosed spaces without ventilation — releases acetic acid (vinegar odour) during cure
Do not apply directly to mirror reflective coatings — acid may damage the backing
Do not use on natural stone (marble, limestone, travertine) — acid may cause staining
Do not use on copper, brass, zinc or other acid-sensitive metals — corrosion may occur
Do not use on surfaces containing plasticiser or solvent residues
Do not apply when substrate temperature is below 4°C or above 40°C

Conseils

For best tooling results, use a small amount of soapy water on the spatula to achieve a smooth finish
Always conduct a compatibility test on actual project materials before full application
Store upright in a cool, dry place away from direct sunlight