BoPin 120 Multi-Purpose Eco Silicone Sealant

BoPin 120 Multi-Purpose Eco Silicone Sealant

BoPin 120 is a single-component, silane-modified sealant that combines the flexibility of silicone with excellent adhesion to a wide range of substrates. It cures at room temperature by reacting with moisture in the air, producing an odourless, flexible rubber with very low VOC content. The solvent-free, paintable formula makes it suitable for both professional contractors and general construction applications where substrate compatibility and environmental performance are priorities.

Lợi ích chính

Paintable after cure — compatible with most water-based and solvent-based paints
Very low VOC — odourless after cure, suitable for occupied spaces
Excellent adhesion to a wide variety of substrates without primer
Solvent-free formula — does not shrink or crack during cure
Anti-bacterial and anti-mould properties
Good deformation capability accommodating minor structural movement
Stable performance across high and low temperature extremes

Adhere To

Kính và bề mặt tráng men
Aluminium, steel and powder-coated metals
Gạch men và gạch sứ
Concrete, brick and masonry
Non-oily timber
Most plastics (compatibility test recommended before use)

Application Areas

Window and door frame installation and perimeter sealing
General-purpose gap filling and joint sealing by professional applicators
Tile, brick, stone and concrete joint filling and sealing

Bưu kiện

300ml cartridge — 24 units per carton 600ml sausage pack — 20 units per carton Available colors upon request

Thông tin bổ sung

Hệ thống bảo dưỡng	Silane-modified (moisture cure)
Solvent Content	None
Nội dung VOC	Very low
Khả năng chịu nhiệt	Resistant to high and low temperature extremes
Hạn sử dụng	12 months (unopened, stored ≤25°C)
Màu sắc	Đen, Nâu, Trong suốt, Tùy chỉnh, Xám, Trắng

Chuẩn bị bề mặt — Ensure surfaces are clean, dry and free from dust, grease and old sealant residues.
Ứng dụng — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool the joint within the working time using a wet spatula.
Curing — Allow to cure at room temperature with adequate ventilation. Full mechanical properties develop after 7 days.
Cleanup — Remove uncured product with a suitable solvent. Cured product must be removed mechanically.

Limitations

Not recommended for joints subject to significant movement
Không khuyến khích ngâm nước liên tục
Not recommended for use in fully enclosed, unventilated spaces
Not recommended for surfaces containing plasticiser or solvent residues
Do not apply when substrate temperature is below 4°C or above 40°C
Not suitable for areas subject to prolonged water contact

Mẹo

Paintability is one of the key advantages of this product — allow full cure before painting for best adhesion
Conduct a compatibility and adhesion test on actual project substrates before full application
Store in a cool, dry place away from direct sunlight

BoPin 120 Multi-Purpose Eco Silicone Sealant

Thông tin bổ sung

Similar and Related Products

Sản phẩm tương tự

BoPin 150 All-Weather Construction Silicone Sealant

Keo dán silicone đá tự nhiên BoPin 635

Keo dán silicone trung tính vệ sinh BoPin 550

Keo dán silicone trung tính đa năng BoPin 122