BoPin 120 Multi-Purpose Eco Silicone Sealant

BoPin 120 Multi-Purpose Eco Silicone Sealant

BoPin 120 is a single-component, silane-modified sealant that combines the flexibility of silicone with excellent adhesion to a wide range of substrates. It cures at room temperature by reacting with moisture in the air, producing an odourless, flexible rubber with very low VOC content. The solvent-free, paintable formula makes it suitable for both professional contractors and general construction applications where substrate compatibility and environmental performance are priorities.

Основные преимущества

Paintable after cure — compatible with most water-based and solvent-based paints
Very low VOC — odourless after cure, suitable for occupied spaces
Excellent adhesion to a wide variety of substrates without primer
Solvent-free formula — does not shrink or crack during cure
Anti-bacterial and anti-mould properties
Good deformation capability accommodating minor structural movement
Stable performance across high and low temperature extremes

Adhere To

Стекло и остекленные поверхности
Aluminium, steel and powder-coated metals
Керамическая и керамогранитная плитка
Concrete, brick and masonry
Non-oily timber
Most plastics (compatibility test recommended before use)

Application Areas

Window and door frame installation and perimeter sealing
General-purpose gap filling and joint sealing by professional applicators
Tile, brick, stone and concrete joint filling and sealing

Пакет

300ml cartridge — 24 units per carton 600ml sausage pack — 20 units per carton Available colors upon request

Детали

Система полимеризации	Silane-modified (moisture cure)
Solvent Content	None
Содержание летучих органических соединений	Very low
Температурная стойкость	Resistant to high and low temperature extremes
Срок годности	12 months (unopened, stored ≤25°C)
Цвет	Черный, коричневый, прозрачный, индивидуальный, серый, белый

Подготовка поверхности — Ensure surfaces are clean, dry and free from dust, grease and old sealant residues.
Приложение — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool the joint within the working time using a wet spatula.
Curing — Allow to cure at room temperature with adequate ventilation. Full mechanical properties develop after 7 days.
Cleanup — Remove uncured product with a suitable solvent. Cured product must be removed mechanically.

Limitations

Not recommended for joints subject to significant movement
Не рекомендуется длительное погружение в воду
Not recommended for use in fully enclosed, unventilated spaces
Not recommended for surfaces containing plasticiser or solvent residues
Do not apply when substrate temperature is below 4°C or above 40°C
Not suitable for areas subject to prolonged water contact

Советы

Paintability is one of the key advantages of this product — allow full cure before painting for best adhesion
Conduct a compatibility and adhesion test on actual project substrates before full application
Store in a cool, dry place away from direct sunlight

BoPin 120 Multi-Purpose Eco Silicone Sealant

Детали

Similar and Related Products

Похожие

BoPin 380 атмосферостойкий фасадный герметик

BoPin 220 All-Weather Window & Door Silicone Sealant

BoPin 770 Высокотемпературный силиконовый герметик

BoPin 550 Санитарный нейтральный силиконовый герметик