BoPin 550 Mould-Resistant Sanitary Silicone Sealant

BoPin 550 is a single-component, neutral-cure, medium-modulus silicone sealant specifically formulated for kitchen and bathroom sealing applications. It incorporates a high-molecular-weight modified base material and a proprietary long-lasting anti-mould formula that provides sustained protection against mould and bacterial growth in permanently wet and humid environments. The non-corrosive cure chemistry makes it safe for use on coated glass, ceramic, marble, granite and metal fixtures without risk of staining or surface damage. Suitable for both interior and exterior applications, it requires no primer on most common sanitary substrates and delivers durable, watertight seals that maintain their integrity and appearance over extended periods in wet areas.

المزايا الرئيسية
  • Long-lasting anti-mould and anti-bacterial protection — specially formulated for permanently humid sanitary environments
  • Neutral cure — non-corrosive to metals, coated glass, ceramics, marble and granite
  • Excellent weather resistance — resists UV radiation and temperature cycling
  • Good adhesion to most common sanitary substrates without primer
  • Non-sag formula — maintains position on vertical joints around baths, basins and shower enclosures
  • Waterproof seal — prevents water ingress at joints between sanitary fixtures and surrounding surfaces
  • Suitable for both indoor and outdoor wet-area applications
التزم بـ
  • بلاط السيراميك والبورسلين
  • Vitreous enamel and acrylic sanitary ware
  • Marble and granite
  • Glass and coated glass
  • Stainless steel, chrome and aluminium fixtures
  • الخرسانة والبناء
مجالات التطبيق
  • Sealing around bathtubs, shower trays and shower enclosures
  • Basin and sink to wall and worktop joint sealing
  • Toilet base and cistern sealing
  • Kitchen worktop and splashback joint sealing
  • Ceramic tile joint sealing in wet areas
  • General indoor and outdoor decorative waterproof sealing
الحزمة
  • عبوة سعة 300 مل - 24 وحدة في الكرتونة
  • الألوان المتوفرة حسب الطلب

معلومات إضافية

المادة الأساسية

سيليكون الأوكسيم المحايد

نظام المعالجة

Neutral cure (medium modulus)

الكثافة

1.01 جم/سم مكعب

الصلابة (شور أ)

20±5

الاستطالة عند الاستراحة

>500%

القدرة على الحركة

± 25%

مقاومة درجات الحرارة

-40 درجة مئوية إلى +120 درجة مئوية

درجة حرارة التطبيق

+5 درجة مئوية إلى +40 درجة مئوية

وقت تكوين الجلد

من 10 إلى 20 دقيقة (23 درجة مئوية/501 درجة مئوية/50% رطوبة نسبية)

وقت المعالجة

2-3 مم/ 24 ساعة (23 درجة مئوية/501 درجة مئوية/501 درجة مئوية رطوبة نسبية)

محتوى المركبات العضوية المتطايرة

<أقل من 35 جم/لتر

الفئة الصحية

XS1 (أعلى فئة صحية)

اللون

أسود، شفاف، أسود، شفاف، حسب الطلب، رمادي، أبيض

معيار

JC/T 885-2016

  • تحضير السطح — Remove all old sealant, soap residue, grease and moisture from surfaces. Surfaces must be completely dry before application — allow at least 24 hours after last water contact.
  • التطبيق — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool immediately using a wet spatula or sealant finishing tool for a smooth, concave finish.
  • المعالجة — Allow to cure at room temperature with adequate ventilation. Avoid water contact for at least 24 hours after application. Full mechanical properties and mould resistance develop after 7 days.
  • تنظيف — Remove uncured sealant with a solvent. Cured sealant must be removed mechanically.
القيود
  • غير مناسب للتطبيقات الإنشائية الحاملة للأحمال
  • Not suitable for continuous full water immersion
  • Not suitable for use in fully enclosed, unventilated spaces
  • Not suitable for surfaces containing plasticiser or solvent residues
  • يحفظ بعيداً عن متناول الأطفال
  • Do not apply when substrate temperature is below 5°C or above 40°C
الإرشادات
  • Thorough surface preparation is the single most important factor in achieving a long-lasting, mould-free seal — any moisture, soap residue or old sealant will shorten joint life
  • ضع شريطًا لاصقًا على جانبي المفصل قبل التطبيق للحصول على خطوط نظيفة واحترافية - قم بإزالته فورًا بعد الانتهاء من العمل قبل تكون الجلدة
  • In high-humidity climates (tropical, subtropical), ensure adequate bathroom ventilation after installation to extend mould-free service life
  • خزّن الخراطيش في وضع رأسي في مكان بارد وجاف بعيدًا عن الحرارة وأشعة الشمس المباشرة.

منتجات مشابهة وذات صلة

طلب عرض أسعار

أخبرنا باحتياجاتك من المنتجات وسنرد عليك في غضون 12 ساعة.

رد مباشر من كريس · عادةً خلال 12 ساعة

يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربة

تُستخدم ملفات تعريف الارتباط على هذا الموقع الإلكتروني لتخصيص المحتوى والإعلانات، وتوفير ميزات التواصل الاجتماعي، وتحليل حركة الزيارات. كما نشارك معلومات حول استخدامك للموقع مع شركائنا في مواقع التواصل الاجتماعي والإعلانات وتحليلات الويب، والذين قد يجمعونها مع معلومات أخرى قدمتها لهم أو جمعوها من خلال استخدامك لخدماتهم.

بوبين_ويب_ويب_لوجو
يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربة

تُستخدم ملفات تعريف الارتباط على هذا الموقع الإلكتروني لتخصيص المحتوى والإعلانات، وتوفير ميزات التواصل الاجتماعي، وتحليل حركة الزيارات. كما نشارك معلومات حول استخدامك للموقع مع شركائنا في مواقع التواصل الاجتماعي والإعلانات وتحليلات الويب، والذين قد يجمعونها مع معلومات أخرى قدمتها لهم أو جمعوها من خلال استخدامك لخدماتهم.