BoPin 550 Mould-Resistant Sanitary Silicone Sealant

BoPin 550 is a single-component, neutral-cure, medium-modulus silicone sealant specifically formulated for kitchen and bathroom sealing applications. It incorporates a high-molecular-weight modified base material and a proprietary long-lasting anti-mould formula that provides sustained protection against mould and bacterial growth in permanently wet and humid environments. The non-corrosive cure chemistry makes it safe for use on coated glass, ceramic, marble, granite and metal fixtures without risk of staining or surface damage. Suitable for both interior and exterior applications, it requires no primer on most common sanitary substrates and delivers durable, watertight seals that maintain their integrity and appearance over extended periods in wet areas.

Principais benefícios
  • Long-lasting anti-mould and anti-bacterial protection — specially formulated for permanently humid sanitary environments
  • Neutral cure — non-corrosive to metals, coated glass, ceramics, marble and granite
  • Excellent weather resistance — resists UV radiation and temperature cycling
  • Good adhesion to most common sanitary substrates without primer
  • Non-sag formula — maintains position on vertical joints around baths, basins and shower enclosures
  • Waterproof seal — prevents water ingress at joints between sanitary fixtures and surrounding surfaces
  • Suitable for both indoor and outdoor wet-area applications
Aderir a
  • Azulejos de cerâmica e porcelana
  • Vitreous enamel and acrylic sanitary ware
  • Marble and granite
  • Glass and coated glass
  • Stainless steel, chrome and aluminium fixtures
  • Betão e alvenaria
Áreas de aplicação
  • Sealing around bathtubs, shower trays and shower enclosures
  • Basin and sink to wall and worktop joint sealing
  • Toilet base and cistern sealing
  • Kitchen worktop and splashback joint sealing
  • Ceramic tile joint sealing in wet areas
  • General indoor and outdoor decorative waterproof sealing
Embalagem
300ml cartridge — 24 units per carton Available colors upon request

Informação adicional

Material de base

Silicone oxima neutro

Sistema de cura

Neutral cure (medium modulus)

Densidade

1,01 g/cm³

Dureza (Shore A)

20±5

Alongamento na rutura

>500%

Capacidade de movimento

±25%

Resistência à temperatura

-40°C a +120°C

Temperatura de aplicação

+5°C a +40°C

Tempo de formação da pele

10-20 minutos (23°C/50% RH)

Tempo de cura

2-3mm/24 horas (23°C/50% RH)

Conteúdo de COV

<35 g/L

Classe sanitária

XS1 (classe sanitária mais elevada)

Cor

Preto, Transparente, Personalizado, Cinzento, Branco

Padrão

JC/T 885-2016

  • Preparação da superfície — Remove all old sealant, soap residue, grease and moisture from surfaces. Surfaces must be completely dry before application — allow at least 24 hours after last water contact.
  • Aplicação — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool immediately using a wet spatula or sealant finishing tool for a smooth, concave finish.
  • Cura — Allow to cure at room temperature with adequate ventilation. Avoid water contact for at least 24 hours after application. Full mechanical properties and mould resistance develop after 7 days.
  • Limpar — Remove uncured sealant with a solvent. Cured sealant must be removed mechanically.
Limitações
  • Not suitable for structural load-bearing applications
  • Not suitable for continuous full water immersion
  • Not suitable for use in fully enclosed, unventilated spaces
  • Not suitable for surfaces containing plasticiser or solvent residues
  • Keep away from children
  • Do not apply when substrate temperature is below 5°C or above 40°C
Dicas
  • Thorough surface preparation is the single most important factor in achieving a long-lasting, mould-free seal — any moisture, soap residue or old sealant will shorten joint life
  • Apply masking tape along both sides of the joint before application for clean, professional lines — remove immediately after tooling before skin forms
  • In high-humidity climates (tropical, subtropical), ensure adequate bathroom ventilation after installation to extend mould-free service life
  • Store cartridges upright in a cool, dry location away from heat and direct sunlight
Este site usa cookies para garantir que você tenha a melhor experiência

Os cookies neste site são usados para personalizar conteúdo e anúncios, fornecer recursos de mídia social e analisar o tráfego. Também compartilhamos informações sobre o seu uso do site com nossos parceiros de mídia social, publicidade e análise da web, que podem combiná-las com outras informações que você forneceu a eles ou que eles coletaram a partir do seu uso dos serviços deles.

Bopin_Web_logo
Este site usa cookies para garantir que você tenha a melhor experiência

Os cookies neste site são usados para personalizar conteúdo e anúncios, fornecer recursos de mídia social e analisar o tráfego. Também compartilhamos informações sobre o seu uso do site com nossos parceiros de mídia social, publicidade e análise da web, que podem combiná-las com outras informações que você forneceu a eles ou que eles coletaram a partir do seu uso dos serviços deles.