BoPin 440 Wood Floor Joint Sealant

BoPin 440 is a single-component, moisture-curing MS polymer sealant and adhesive specifically formulated for solid wood and engineered wood floor installation and joint filling. Based on modified silane polymer technology, it cures at room temperature to form a strong, highly elastic rubber that bonds and seals wood floor joints with excellent flexibility. The extended open time allows efficient application across large floor areas before board placement, and the cured body accommodates the natural expansion and contraction of wood flooring without cracking or debonding. Compatible with both solid and engineered wood types including strip flooring, parquet, thick strip, mosaic strip and timber boards.

المزايا الرئيسية

Excellent elasticity — elongation at break 469%, accommodates natural wood movement without joint failure
High tensile strength — 2.13 MPa provides strong, durable bond between floor boards
Extended open time — allows efficient work across large floor areas before board placement
Good adhesion to wood, aluminium and glass substrates without primer
Solvent-free formula — safe for use in occupied or enclosed interior spaces
Low odour — suitable for residential and commercial interior flooring applications

التزم بـ

Solid timber and engineered wood boards
Parquet and mosaic wood strips
Wood-based panels and hardboard
Aluminium transition profiles
Concrete subfloor (as bonding substrate)

مجالات التطبيق

Solid wood floor joint filling and board bonding
Engineered wood floor installation — strip, long strip, thick strip and mosaic strip
Industrial wood flooring installation
Residential veneer panel and hardboard bonding

الحزمة

600ml sausage pack — 20 units per carton Available colors upon request

معلومات إضافية

نظام المعالجة	MS Polymer (moisture cure)
Density (g/cm³)	1.39
الصلابة (شور أ)	40
قوة الشد	2.13 MPa
الاستطالة عند الاستراحة	469%
Cure Rate (depth)	2.5 mm / 24 hours
وقت تكوين الجلد	approx. 46 min
Aluminium Bonding	Pass
Glass Bonding	Pass
مدة الصلاحية	12 شهرًا (غير مفتوح، ≤27 درجة مئوية)
اللون	مخصص
Application Fields	الطابق الأرضي

تحضير السطح — Ensure the subfloor and wood surfaces are clean, dry and free from dust, grease and loose material. Allow wood flooring to acclimatise to the installation environment before applying.
التطبيق — Cut cartridge tip at 45°, load into sealant gun and apply into floor joints or bonding areas with steady, even pressure. Work in manageable sections within the open time.
المعالجة — Allow to cure at room temperature. Avoid heavy foot traffic for at least 24 hours. Full mechanical properties develop after 7 days.
تنظيف — Remove uncured product with a suitable solvent before skin formation. Cured product must be removed mechanically.

القيود

Not suitable for continuous water immersion or permanently wet floor areas — use appropriate waterproof flooring systems for wet rooms
Not suitable for use on PE, PP or PTFE surfaces
Not recommended for exterior flooring exposed to direct weathering
Not suitable for structural load-bearing applications
Do not apply when substrate temperature is below 4°C or above 40°C
For flooring over underfloor heating systems, confirm compatibility with the flooring manufacturer before use

الإرشادات

Allow wood flooring to acclimatise to the installation room for at least 48 hours before installation to minimise post-installation movement
For large-format solid wood boards, ensure adequate expansion gaps at perimeter walls — the sealant accommodates joint movement but cannot substitute for proper floor design
Extended skin formation time (≥46 min) is a useful feature for large floor projects — take advantage of the open time for efficient board placement before the product skins
Store cartridges upright in a cool, dry location away from heat and direct sunlight

BoPin 440 Wood Floor Joint Sealant

معلومات إضافية

منتجات مشابهة وذات صلة

منتجات ذات صلة

مانع تسرب البولي يوريثان البولي يوريثان 730 المقاوم للحريق