BoPin 640 Decorative Trim Silicone Sealant

BoPin 640 is a single-component, neutral-cure, high-strength silicone sealant formulated for interior decorative finishing and trim sealing applications. It combines good elasticity with waterproof and moisture-resistant properties, making it suitable for securing and sealing decorative elements including door and window surrounds, skirting boards, cabinet bodies and toilet bases. The green-certified, eco-friendly formula carries very low odour and is suitable for use in occupied residential and commercial interiors. Multiple colour options allow the product to blend with surrounding decorative finishes for a clean, professional result.

Основные преимущества

Neutral cure — non-corrosive, safe for use on all common interior decorative materials
High bond strength and elasticity — secures decorative trim elements while accommodating minor movement
Waterproof seal — prevents moisture and water ingress at decorative joints
Seals joints against moisture, pest ingress and harmful gas infiltration
Prevents wallpaper edge lifting and blocks dust infiltration at wall junctions
Green-certified eco-friendly formula — low odour, suitable for occupied interior spaces
Multiple colour options — blends with surrounding decorative finishes
Easy to clean joint surfaces

Придерживаться

Wood and timber-based mouldings and profiles
PVC and painted profiles
Painted concrete and plaster walls
Most common interior decorative trim substrates

Области применения

Door surround and window surround securing and sealing
Skirting board and PU moulding edge fixing and sealing
Cabinet body installation and perimeter joint sealing
Toilet base and bathroom fixture perimeter sealing
Preventing wallpaper edge lifting at wall junctions
General interior decorative joint finishing and cosmetic sealing

Пакет

300ml cartridge — 24 units per carton 600ml sausage pack — 20 units per carton Available colors upon request

Детали

Система полимеризации	Neutral cure
Sag / Slump	≤3 mm
Время формирования кожи	≤20 min
Working Time	≤20 min
Cure Rate (depth)	2–4 mm/day
Твердость (по Шору A)	40
Прочность на разрыв	≥1.0 MPa
Удлинение при разрыве	≥200%
Срок годности	Срок годности: 12 месяцев (в закрытой упаковке, при температуре ≤27°C)
Цвет	Черный, индивидуальный, серый, белый
Стандарт	JC/T 485-2007

Подготовка поверхности — Ensure all surfaces are clean, dry and free from dust, grease and old sealant residues. Surfaces must be fully dry before application.
Приложение — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool within the working time using a wet spatula for a smooth finish. Apply masking tape along both sides of the joint for clean, precise lines.
Затвердевание — Allow to cure at room temperature with adequate ventilation. Full mechanical properties develop after 7 days.
Cleanup — Remove uncured sealant with a solvent before skin formation. Cured sealant must be removed mechanically.

Ограничения

Не подходит для длительного погружения в воду
Not suitable for structural load-bearing applications
Keep away from children
Ensure adequate ventilation during and after application
Do not apply when substrate temperature is below 4°C or above 40°C
Do not store above 27°C

Советы

Apply masking tape along both sides of the joint before application for clean, professional lines — remove immediately after tooling before skin forms
For toilet base sealing, ensure the base and floor are completely dry and clean before applying — any residual cleaning product or moisture will shorten joint service life
In high-humidity climates, allow adequate ventilation after application to ensure full cure
Store cartridges upright in a cool, dry location away from heat and direct sunlight

BoPin 640 Decorative Trim Silicone Sealant

Детали

Похожие и сопутствующие товары

Похожие

BoPin 150 All-Weather Construction Silicone Sealant

BoPin 120 Multi-Purpose Eco Silicone Sealant

Силиконовый герметик для натурального камня BoPin 635

BoPin 550 Mould-Resistant Sanitary Silicone Sealant