BoPin 440 Wood Floor Joint Sealant

BoPin 440 is a single-component, moisture-curing MS polymer sealant and adhesive specifically formulated for solid wood and engineered wood floor installation and joint filling. Based on modified silane polymer technology, it cures at room temperature to form a strong, highly elastic rubber that bonds and seals wood floor joints with excellent flexibility. The extended open time allows efficient application across large floor areas before board placement, and the cured body accommodates the natural expansion and contraction of wood flooring without cracking or debonding. Compatible with both solid and engineered wood types including strip flooring, parquet, thick strip, mosaic strip and timber boards.

Principais benefícios

Excellent elasticity — elongation at break 469%, accommodates natural wood movement without joint failure
High tensile strength — 2.13 MPa provides strong, durable bond between floor boards
Extended open time — allows efficient work across large floor areas before board placement
Good adhesion to wood, aluminium and glass substrates without primer
Solvent-free formula — safe for use in occupied or enclosed interior spaces
Low odour — suitable for residential and commercial interior flooring applications

Aderir a

Solid timber and engineered wood boards
Parquet and mosaic wood strips
Wood-based panels and hardboard
Aluminium transition profiles
Concrete subfloor (as bonding substrate)

Áreas de aplicação

Solid wood floor joint filling and board bonding
Engineered wood floor installation — strip, long strip, thick strip and mosaic strip
Industrial wood flooring installation
Residential veneer panel and hardboard bonding

Embalagem

600ml sausage pack — 20 units per carton Available colors upon request

Informação adicional

Sistema de cura	MS Polymer (moisture cure)
Density (g/cm³)	1.39
Dureza (Shore A)	40
Resistência à tração	2.13 MPa
Alongamento na rutura	469%
Cure Rate (depth)	2.5 mm / 24 hours
Tempo de formação da pele	approx. 46 min
Aluminium Bonding	Pass
Glass Bonding	Pass
Prazo de validade	12 meses (fechado, ≤27°C)
Cor	Personalizado
Application Fields	Piso

Preparação da superfície — Ensure the subfloor and wood surfaces are clean, dry and free from dust, grease and loose material. Allow wood flooring to acclimatise to the installation environment before applying.
Aplicação — Cut cartridge tip at 45°, load into sealant gun and apply into floor joints or bonding areas with steady, even pressure. Work in manageable sections within the open time.
Cura — Allow to cure at room temperature. Avoid heavy foot traffic for at least 24 hours. Full mechanical properties develop after 7 days.
Limpar — Remove uncured product with a suitable solvent before skin formation. Cured product must be removed mechanically.

Limitações

Not suitable for continuous water immersion or permanently wet floor areas — use appropriate waterproof flooring systems for wet rooms
Not suitable for use on PE, PP or PTFE surfaces
Not recommended for exterior flooring exposed to direct weathering
Not suitable for structural load-bearing applications
Do not apply when substrate temperature is below 4°C or above 40°C
For flooring over underfloor heating systems, confirm compatibility with the flooring manufacturer before use

Dicas

Allow wood flooring to acclimatise to the installation room for at least 48 hours before installation to minimise post-installation movement
For large-format solid wood boards, ensure adequate expansion gaps at perimeter walls — the sealant accommodates joint movement but cannot substitute for proper floor design
Extended skin formation time (≥46 min) is a useful feature for large floor projects — take advantage of the open time for efficient board placement before the product skins
Store cartridges upright in a cool, dry location away from heat and direct sunlight

BoPin 440 Wood Floor Joint Sealant

Informação adicional

Produtos similares e relacionados

Produtos Relacionados

BoPin 730 Selante PU resistente ao fogo