BoPin 790 Fire-Rated Silicone Sealant

BoPin 790 is a single-component, neutral-cure, high-performance silicone sealant with outstanding fire-retardant properties. It remains transparent in flame, does not support combustion, and self-extinguishes immediately upon removal of the ignition source — achieving UL94 V-0 flame retardant classification. The product cures at room temperature upon exposure to atmospheric moisture, forming a durable, flexible rubber that bonds reliably to glass, aluminium, steel, stone and most common building materials without primer. Suitable for fire door and window sealing, curtain wall fire-stop banding, electronic and electrical component flame-retardant sealing, and moisture-resistant sealing in public spaces where fire safety is a primary requirement.

Principaux avantages
  • UL94 V-0 flame retardant classification — transparent in flame, non-combusting, self-extinguishing
  • Neutral cure — non-corrosive, safe for use on metals, coated glass, stone and most building materials
  • Good adhesion to glass, aluminium, steel and stone without primer
  • Sag resistance ≤3mm — suitable for vertical joint applications
  • Stable performance from -50°C to +170°C
  • Good movement capability — ±20% accommodates minor structural movement at fire-rated joints
  • Meets GB/T 24267-2009 standard
Adhérer à
  • Glass and coated glass
  • Aluminium and steel
  • Natural stone and ceramic
  • Béton et maçonnerie
  • Most common building materials (compatibility test recommended for non-standard substrates)
Domaines d'application
  • Fire door and window frame bonding and perimeter sealing
  • Curtain wall fire-stop banding and each-floor fire barrier sealing
  • Electronic and electrical component fixing and flame-retardant sealing
  • Fire-resistant and moisture-resistant decorative sealing in public spaces
  • General fire-rated joint sealing in commercial and public buildings
Paquet
300ml cartridge — 24 units per carton Available colors upon request

Informations complémentaires

Système de polymérisation

Single-component neutral cure

Fire Retardant Classification

UL94 V-0

Sag / Slump (mm)

≤3

Skin Formation Time (min)

≤30

Working Time (min)

≤25

Cure Rate (depth)

2–3 mm/day

Dureté (Shore A)

45

Tensile Strength (MPa)

≥1.0

Elongation at Max Strength (%)

≥150

Elongation at Break (%)

≥200

Capacité de mouvement

±20%

Résistance à la température

-50°C to +170°C

Durée de conservation

12 months (unopened, ≤25°C)

Couleur

Black, Customized

Standard

GB/T 24267-2009

  • Préparation de la surface — Ensure all surfaces are clean, dry and free from dust, grease and old sealant residues. For fire door and curtain wall applications, verify that joint dimensions comply with the relevant fire-rated system design.
  • Application — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure into the joint. Tool within the working time using a wet spatula.
  • durcissement — Allow to cure at room temperature with adequate ventilation. Full mechanical properties develop after 7 days.
  • Cleanup — Remove uncured sealant with a solvent before skin formation. Cured sealant must be removed mechanically.
Limites
  • Not suitable for structural load-bearing applications
  • Ne convient pas à une immersion continue dans l'eau
  • Not suitable for use in sealed, unventilated spaces or in direct contact with food or drinking water
  • Not suitable for bonding copper or copper alloy components — copper ions inhibit cure
  • Not suitable for surfaces containing plasticiser or solvent residues
  • Do not apply when substrate temperature is below 4°C or above 40°C
Conseils
  • This product achieves V-0 flame retardant classification under GB/T 24267-2009. For fire-rated penetration sealing requiring EI or EW rated systems, verify compliance with local fire codes before specifying
  • Always verify that the intended application complies with local building code and fire safety regulations before specifying
  • Conduct a compatibility and adhesion test on actual project substrates before full application
  • Store cartridges upright in a cool, dry location away from heat and direct sunlight
Ce site utilise des cookies pour vous garantir la meilleure expérience

Les cookies sur ce site web sont utilisés pour personnaliser le contenu et les publicités, fournir des fonctionnalités de réseaux sociaux et analyser le trafic. Nous partageons également des informations sur votre utilisation du site web avec nos partenaires de réseaux sociaux, de publicité et d'analyse web, qui peuvent les combiner avec d'autres informations que vous leur avez fournies ou qu'ils ont collectées lors de votre utilisation de leurs services.

Bopin_Web_logo
Ce site utilise des cookies pour vous garantir la meilleure expérience

Les cookies sur ce site web sont utilisés pour personnaliser le contenu et les publicités, fournir des fonctionnalités de réseaux sociaux et analyser le trafic. Nous partageons également des informations sur votre utilisation du site web avec nos partenaires de réseaux sociaux, de publicité et d'analyse web, qui peuvent les combiner avec d'autres informations que vous leur avez fournies ou qu'ils ont collectées lors de votre utilisation de leurs services.