BoPin 380 Hava Koşullarına Dayanıklı Cephe Mastik

BoPin 380 Weather-Resistant Facade Sealant_600ml

BoPin 380 Weather-Resistant Facade Sealant_benefits

BoPin 380 Hava Koşullarına Dayanıklı Cephe Mastik

BoPin 380 is a single-component, neutral-cure oxime silicone sealant formulated specifically for curtain wall and building facade weatherproofing applications. formulated to the highest performance tier of neutral-cure weatherproof silicone technology, it delivers exceptional elasticity, movement capability and long-term resistance to UV radiation, ageing and extreme temperature fluctuations. The non-sag thixotropic formula maintains its position on vertical facade joints without slumping, and the product bonds reliably to powder-coated metals, glass, coated glass, ceramic tiles, aluminium composite panels and masonry — the full range of materials encountered in modern facade systems. Supplied in 590ml sausage packs for professional contractor efficiency.

Temel Faydalar

High movement capability — ±30% accommodates significant thermal and structural movement in facade systems
Exceptional elasticity — elongation at break ≥400%, maintains seal integrity under repeated joint cycling
Outstanding UV resistance — resists ageing, yellowing and degradation from prolonged solar exposure
Stable performance from -50°C to +170°C — suitable for extreme climate markets including Middle East, Central Asia and North Africa
Non-sag thixotropic formula — maintains position on vertical and overhead joints without slumping
Excellent adhesion to powder-coated metals, glass, coated glass, ceramic tiles, aluminium composite panels and masonry
Meets GB/T 14683-2017 standard — high-end certified silicone series

Adhere To

Powder-coated and anodised aluminium
Glass and coated glass
Aluminium composite panels (ACP)
Seramik ve porselen karolar
Brick, concrete and masonry
Various spray-coated metal profiles

Application Areas

Curtain wall weatherproofing and perimeter joint sealing
Various spray-coated metal profile bonding and sealing
Glass, coated glass, ceramic tile and brick/concrete joint sealing
Aluminium composite panel (ACP) joint sealing
Exterior facade expansion joint sealing
Building envelope weatherproofing at material transitions

Paket

300ml cartridge — 24 units per carton
600ml sausage pack — 20 units per carton
Available colors upon request

Ek bilgi

Kürleme Sistemi	Neutral (oxime cure)
Sag / Slump	≤3 mm
Deri Oluşum Süresi	≤20 min
Working Time	≤20 min
Cure Rate (depth)	1–2 mm/day
Sertlik (Shore A)	40
Çekme Dayanımı	≥1.0 MPa
Kopma Uzaması	≥400%
Hareket Kabiliyeti	±30%
Sıcaklık Dayanımı	-50°C to +170°C
Raf Ömrü	12 months (unopened, ≤25°C)
Standard	GB/T 14683-2017
Renk	Customized

Yüzey Hazırlığı — Ensure all surfaces are clean, dry and free from dust, grease, old sealant residues and loose coatings. Clean metal surfaces with isopropyl alcohol and allow to dry completely before application.
Uygulama — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure into the joint. Tool within the working time using a spatula dampened with soapy water. Apply masking tape for clean professional joint lines.
Curing — Allow to cure at room temperature with adequate ventilation. Avoid rain or water contact for at least 24 hours. Full mechanical properties develop after 7 days.
Temizlemek — Remove uncured sealant with a solvent before skin formation. Cured sealant must be removed mechanically.

Limitations

Not suitable for structural glazing or primary structural assembly
Not recommended for movement exceeding ±30%
Not recommended for continuous water immersion or aquarium construction
Not recommended for use in fully enclosed, unventilated spaces
Not recommended for surfaces containing plasticiser or solvent residues
Do not apply when substrate temperature is below 4°C or above 40°C

İpuçları

For facade joints subject to high thermal cycling — particularly in desert and continental climates — ensure joint width is designed to keep actual movement within the ±30% capability
Apply masking tape along both sides of the joint for clean, precise lines — remove immediately after tooling before skin forms
Although neutral-cure, this product uses oxime chemistry — ensure adequate ventilation during application in enclosed or interior spaces
Always conduct a compatibility and adhesion test on actual project substrate combinations before full application
For joints requiring movement capability above ±30%, please contact us for product recommendations suited to your specific application.