BoPin 640 Decorative Trim Silicone Sealant_benefit

BoPin 640 Dekoratif Kenar Silikonu

BoPin 640, iç mekan dekoratif kaplama ve pervaz sızdırmazlığı uygulamaları için formüle edilmiş, tek bileşenli, nötr kürlemeli, yüksek mukavemetli bir silikon mastiktir. İyi esnekliği su geçirmez ve neme dayanıklı özellikleriyle birleştirerek, kapı ve pencere çerçeveleri, süpürgelikler, dolap gövdeleri ve klozet altlıkları dahil olmak üzere dekoratif unsurların sabitlenmesi ve sızdırmazlığı için uygundur. Yeşil sertifikalı, çevre dostu formülü çok düşük kokuya sahiptir ve kullanılan konut ve ticari iç mekanlarda kullanıma uygundur. Çoklu renk seçenekleri, ürünün temiz ve profesyonel bir sonuç için çevredeki dekoratif kaplamalarla uyum sağlamasına olanak tanır.

Temel Faydalar

Neutral cure — non-corrosive, safe for use on all common interior decorative materials
High bond strength and elasticity — secures decorative trim elements while accommodating minor movement
Waterproof seal — prevents moisture and water ingress at decorative joints
Seals joints against moisture, pest ingress and harmful gas infiltration
Prevents wallpaper edge lifting and blocks dust infiltration at wall junctions
Green-certified eco-friendly formula — low odour, suitable for occupied interior spaces
Multiple colour options — blends with surrounding decorative finishes
Easy to clean joint surfaces

Adhere To

Wood and timber-based mouldings and profiles
PVC and painted profiles
Painted concrete and plaster walls
Most common interior decorative trim substrates

Application Areas

Door surround and window surround securing and sealing
Skirting board and PU moulding edge fixing and sealing
Cabinet body installation and perimeter joint sealing
Toilet base and bathroom fixture perimeter sealing
Preventing wallpaper edge lifting at wall junctions
General interior decorative joint finishing and cosmetic sealing

Paket

300ml cartridge — 24 units per carton
600ml sausage pack — 20 units per carton
Available colors upon request

Ek bilgi

Kürleme Sistemi	Neutral cure
Sag / Slump	≤3 mm
Deri Oluşum Süresi	≤20 min
Working Time	≤20 min
Cure Rate (depth)	2–4 mm/day
Sertlik (Shore A)	40
Çekme Dayanımı	≥1.0 MPa
Kopma Uzaması	≥200%
Raf Ömrü	12 months (unopened, ≤27°C)
Renk	Siyah, Özelleştirilmiş, Gri, Beyaz
Standard	JC/T 485-2007

Yüzey Hazırlığı — Ensure all surfaces are clean, dry and free from dust, grease and old sealant residues. Surfaces must be fully dry before application.
Uygulama — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool within the working time using a wet spatula for a smooth finish. Apply masking tape along both sides of the joint for clean, precise lines.
Curing — Allow to cure at room temperature with adequate ventilation. Full mechanical properties develop after 7 days.
Temizlemek — Remove uncured sealant with a solvent before skin formation. Cured sealant must be removed mechanically.

Limitations

Sürekli suya daldırma için uygun değildir
Not suitable for structural load-bearing applications
Keep away from children
Ensure adequate ventilation during and after application
Do not apply when substrate temperature is below 4°C or above 40°C
Do not store above 27°C

İpuçları

Apply masking tape along both sides of the joint before application for clean, professional lines — remove immediately after tooling before skin forms
For toilet base sealing, ensure the base and floor are completely dry and clean before applying — any residual cleaning product or moisture will shorten joint service life
In high-humidity climates, allow adequate ventilation after application to ensure full cure
Store cartridges upright in a cool, dry location away from heat and direct sunlight