BoPin 640 Decorative Trim Silicone Sealant

BoPin 640 is a single-component, neutral-cure, high-strength silicone sealant formulated for interior decorative finishing and trim sealing applications. It combines good elasticity with waterproof and moisture-resistant properties, making it suitable for securing and sealing decorative elements including door and window surrounds, skirting boards, cabinet bodies and toilet bases. The green-certified, eco-friendly formula carries very low odour and is suitable for use in occupied residential and commercial interiors. Multiple colour options allow the product to blend with surrounding decorative finishes for a clean, professional result.

المزايا الرئيسية
  • Neutral cure — non-corrosive, safe for use on all common interior decorative materials
  • High bond strength and elasticity — secures decorative trim elements while accommodating minor movement
  • Waterproof seal — prevents moisture and water ingress at decorative joints
  • Seals joints against moisture, pest ingress and harmful gas infiltration
  • Prevents wallpaper edge lifting and blocks dust infiltration at wall junctions
  • Green-certified eco-friendly formula — low odour, suitable for occupied interior spaces
  • Multiple colour options — blends with surrounding decorative finishes
  • Easy to clean joint surfaces
التزم بـ
  • Wood and timber-based mouldings and profiles
  • PVC and painted profiles
  • Painted concrete and plaster walls
  • Most common interior decorative trim substrates
مجالات التطبيق
  • Door surround and window surround securing and sealing
  • Skirting board and PU moulding edge fixing and sealing
  • Cabinet body installation and perimeter joint sealing
  • Toilet base and bathroom fixture perimeter sealing
  • Preventing wallpaper edge lifting at wall junctions
  • General interior decorative joint finishing and cosmetic sealing
الحزمة
300ml cartridge — 24 units per carton 600ml sausage pack — 20 units per carton Available colors upon request

معلومات إضافية

نظام المعالجة

Neutral cure

Sag / Slump

≤3 mm

وقت تكوين الجلد

≤20 min

Working Time

≤20 min

Cure Rate (depth)

2–4 mm/day

الصلابة (شور أ)

40

قوة الشد

≥1.0 MPa

الاستطالة عند الاستراحة

≥200%

مدة الصلاحية

12 شهرًا (غير مفتوح، ≤27 درجة مئوية)

اللون

أسود، مخصص، أسود، رمادي، أبيض

معيار

JC/T 485-2007

  • تحضير السطح — Ensure all surfaces are clean, dry and free from dust, grease and old sealant residues. Surfaces must be fully dry before application.
  • التطبيق — Cut cartridge tip at 45°, load into sealant gun and apply with steady, even pressure. Tool within the working time using a wet spatula for a smooth finish. Apply masking tape along both sides of the joint for clean, precise lines.
  • المعالجة — Allow to cure at room temperature with adequate ventilation. Full mechanical properties develop after 7 days.
  • تنظيف — Remove uncured sealant with a solvent before skin formation. Cured sealant must be removed mechanically.
القيود
  • غير مناسب للغمر المستمر في الماء
  • Not suitable for structural load-bearing applications
  • Keep away from children
  • Ensure adequate ventilation during and after application
  • Do not apply when substrate temperature is below 4°C or above 40°C
  • Do not store above 27°C
الإرشادات
  • Apply masking tape along both sides of the joint before application for clean, professional lines — remove immediately after tooling before skin forms
  • For toilet base sealing, ensure the base and floor are completely dry and clean before applying — any residual cleaning product or moisture will shorten joint service life
  • In high-humidity climates, allow adequate ventilation after application to ensure full cure
  • Store cartridges upright in a cool, dry location away from heat and direct sunlight
يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربة

تُستخدم ملفات تعريف الارتباط على هذا الموقع الإلكتروني لتخصيص المحتوى والإعلانات، وتوفير ميزات التواصل الاجتماعي، وتحليل حركة الزيارات. كما نشارك معلومات حول استخدامك للموقع مع شركائنا في مواقع التواصل الاجتماعي والإعلانات وتحليلات الويب، والذين قد يجمعونها مع معلومات أخرى قدمتها لهم أو جمعوها من خلال استخدامك لخدماتهم.

بوبين_ويب_ويب_لوجو
يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربة

تُستخدم ملفات تعريف الارتباط على هذا الموقع الإلكتروني لتخصيص المحتوى والإعلانات، وتوفير ميزات التواصل الاجتماعي، وتحليل حركة الزيارات. كما نشارك معلومات حول استخدامك للموقع مع شركائنا في مواقع التواصل الاجتماعي والإعلانات وتحليلات الويب، والذين قد يجمعونها مع معلومات أخرى قدمتها لهم أو جمعوها من خلال استخدامك لخدماتهم.